Printing Money

Printing Money
Printing Money

As the additive manufacturing industry continues to rapidly grow and evolve, so too does the financing that enables the technology innovation. ‘Printing Money’ takes a deeper look at the transactions behind some of the most innovative 3D printing businesses. We explore everything from mergers, acquisitions, fundraising, and the public markets, while considering broader technology trends and market movements in the AM industry. Each episode, we’ll dive into the latest investments in the 3D printing industry and understand how they’ll shape the future of the industry. With our combined expertise in finance and additive manufacturing, we’ll give you the context you need to better understand the deals done in our industry.

  1. ٢٩ أبريل

    Printing Money Episode 28: Recent M&A and More with Joris Peels, 3DPrint.com

    Welcome to Episode 28 of Printing Money.  For this one Danny is joined by our own, Joris Peels (Executive Editor, 3DPrint.com). This crossover-pod is indeed quite meta-level but it’s not entirely new – some months ago Danny appeared on Joris’ own podcast, the 3DPOD.  We encourage you to listen to that episode as well. Episode 28 begins with an introduction to Joris, and a look at his nearly two decades in 3D printing. From Philips to Shapeways, to Materialise and Formlabs, and consulting across the industry, Joris has some reach, to say the least. Next, Danny and Joris review RAPID, the largest 3DP/AM event in the USA, which took place earlier this month in Detroit. The cautiously optimistic tone that has been 2025 was decidedly in force at RAPID, and oh by-the-way there was a noticeable presence from the Chinese brands, tariffs or not. From RAPID the conversation shifts to geopolitics, the regulatory environment, and yes, tariffs. Amongst the analysis are some great quotables to look for, including “Manufacturing itself is a weapons system,” and “Uncertainty is the new normal,” all amidst a whole lot of 3DP/AM industry food for thought. And all that is only the first half. In the second half of the episode, Danny and Joris dive into Printing Money’s raison d’etre - deals and analysis! Specifically, this episode focuses on recent M&A, including coverage of the Nano Dimension-Desktop Metal-Markforged tie-up, BICO’s new direction under Maria Forss, Fictiv’s eye-catching acquisition by Misumi, and the trend of traditional Japanese manufacturers embracing 3DP/AM. Please enjoy Episode 28 and check out our previous episodes too. This episode was recorded April 24, 2025. Timestamps: 00:12 – Welcome to Episode 28, and welcome to Joris Peels! 00:42 – 3DP/AM since 2008: Joris through the years 03:17 – RAPID 2025 review 06:08 – Were the Chinese booths at RAPID 2025 the largest? 07:09 – Some notable startups at RAPID 2025 were not the flashiest: Manifest Technologies, PanOptimization, Euler, and more 08:48 – Geopolitics and the 3D printing industry 11:29 – European financial markets: Rheinmetall, BAE, were amongst top Q1 performers 12:22 – Direct impacts from geopolitics can hit 3D printing deals 13:58 – 3D Printed Drone Swarms: Has the industry accepted its role in defense? 16:12 – Manufacturing itself is a weapons system 17:52 – Tariffs and the 3D printing industry 21:40 – Uncertainty is the new normal 23:44 – Regulatory hurdles to reshoring 25:15 – Is M&A coming back? 26:22 – Fictiv to be acquired by Misumi (TSE: 9962) for $350M 29:45 – Fictiv’s valuation and Misumi’s valuation versus, say that of Xometry (XMTR) 32:14 – Desktop Metal (DM) officially acquired by Nano Dimension (NNDM), and  Markforged is (MKFG) next 36:57 – BICO (STO: BICO) selling MatTek and Visikol to Sartorius (ETR: SRT3) for $80M 40:45 – Fortissimo’s $120M investment in Stratasys has been completed 41:03 – nTop acquires cloudfluid 45:22 – Fabrisonic acquired by UPM, an O’Neal Industries company 49:18 – Sodick to full acquire Prima Additive 55:12 – The Japanese machine tool industry: Nidec attempting to takeover Makino 58:45 – Japanese manufacturers helping to bridge 3DP/AM into tradiitonal manufacturing (Nikon SLM Solution, Seiko Epson, DMG Mori, Sodick, JEOL, Nidec, and more…) 1:01:25 – Thanks to Joris and thanks to our audience for listening to Episode 28 of Printing Money 1:02:02 – Disclaimer Disclaimer: This content is for informational purposes only, you should not construe any such information or other material as legal, tax, investment, financial, or other advice. Nothing stated on this podcast constitutes a solicitation, recommendation, endorsement, or offer by the hosts, the organizer or any third-party service provider to buy or sell any securities or other financial instruments in this or in any other jurisdiction in which such solicitation ...

    ١ س ٣ د

  2. ٧ أبريل

    Printing Money Episode 27: Q4 2024 Public 3D Printing Earnings Review with Troy Jensen, Cantor Fitzgerald

    Q2 2025 has already begun, but public markets reporting has only just finished with Q4 2024. To tie a bow on Q4 2024, we are thankful to have Troy Jensen (Managing Director, Cantor Fitzgerald) return and join Danny Piper (Managing Partner, NewCap Partners) for Printing Money Episode 27. Danny and Troy kick off this episode discussing themes they’ve noticed in public and private additive manufacturing (AM) markets as 2024 completed and 2025 began. It’s mentioned later in the episode, but you might say there’s a FUD (Fear, Uncertainty, and Doubt) factor hanging over the industry—further exacerbated by global macro issues. Looking through these “FUD-dy” lenses, Danny and Troy then move on to the 2024 annual 3D printing market data reports recently issued by AM Research and AMPOWER. How well did these reports sync with what our esteemed host and guest are seeing in their worlds? Then, Danny and Troy dive into what this quarterly check-in is all about—the quarterly reporting from the publicly traded AM companies. Fact is, there are fewer public companies out there nowadays, and even fewer that are reporting their numbers with regularity. So, Episode 27 is relatively brief, but chock full of value. RAPID + TCT, the largest 3D printing event in the USA, takes place this week, so if you want to sound smart on the trade show floor or in one of the many expert sessions, perhaps take some tidings from Episode 27. Please enjoy Episode 27, and please join Danny, Troy, and your other favorite Printing Money personalities at RAPID in Detroit this week! This episode was recorded March 31, 2025. Timestamps: 00:14 – Welcome to Episode 27 and welcome back to Troy Jensen (Cantor Fitzgerald) 00:41 – Themes coming out of Q4 into 2025: Tariff stagnation, flat-to-slightly-up guidance, low visibility, reasons for optimism 02:13 – Private 3DP/AM markets picking back up 02:33 – Recent market data reports from AM Research and AMPOWER 03:37 – Nikon SLM Solutions (7731.JP) Q4 2024 results and analysis 05:35 – BLT (688333.SH) Q4 2024 results and analysis 06:10 – Valuation dislocation? China 3DP/AM stock performance 08:06 – Deal on?! Legal victory for Desktop Metal (DM) over Nano Dimension (NNDM) 11:07 – Balancing act: NNDM-DM-MKFG integration challenges and industry implications 14:38 – FUD Factor (Fear, Uncertainty, and Doubt) 15:03 – Stratasys (SSYS) Q4 2024 results and analysis 17:05 – 3D Systems (DDD) Q4 2024 results and analysis 20:15 – Materialise (MTLS) Q4 2024 results and analysis 21:38 – Investors need to wake up and stop looking for software returns in manufacturing 24:15 – AM production in Europe is in shambles 25:15 – Public markets expectations are built into stock pricing 26:38 – Looking forward to RAPID 27:21 – Thanks again to Troy and thanks for listening Disclaimer: This content is for informational purposes only. You should not construe any such information or other material as legal, tax, investment, financial, or other advice. Nothing stated on this podcast constitutes a solicitation, recommendation, endorsement, or offer by the hosts, the organizer, or any third-party service provider to buy or sell any securities or other financial instruments in this or in any other jurisdiction in which such solicitation or offer would be unlawful under the securities laws of such jurisdiction. The information on this podcast is of a general nature that does not address the circumstances and risk profile of any individual or entity and should not constitute professional and/or financial advice. Referenced transactions are sourced from publicly available information. Danny Piper is a registered representative of Finalis Securities LLC, member FINRA/SIPC. This material has been prepared for information and educational purposes only, and it is not intended to provide, nor should it be relied on for, tax, legal, or investment advice. Investors should consult with their own tax, legal,

    ٢٨ من الدقائق

  3. ٢٤ فبراير

    Printing Money Episode 26: 3D Printing Markets and Deals with Dayton Horvath, AMT

    Welcome to Printing Money Episode 26!  For this episode, Danny is joined by Dayton Horvath, Director of Emerging Technology at AMT (and Printing Money alum!). Danny and Dayton had some quality time to plan this episode, having both just been at Additive Manufacturing Strategies a couple weeks ago.  And the planning was needed, because there have been a lot of noteworthy deals not just in the last month, but also some in Q4 which we hadn’t had time to cover. Danny and Dayton start off by reviewing AMS 2025.  Speeches by Stratasys CEO Yoav Zeif, AM Research’s Scott Dunham, and The Barnes Global Advisors’ John Barnes are all referenced as the additive manufacturing (AM) “industry” struggles to establish its value and confronts its status as a standalone (or not?) technology. Next, drawing upon AMT data, Dayton takes us through the 2024 year that was in 3D printing M&A and investment (Hint… not a great year!).   Danny and Dayton also highlight some of the most notable 2024 deals. Then Danny and Dayton jump into Printing Money’s bread and butter, analyzing recent deals across the 3D printing landscape.  Some themes include software companies buying simulation companies, a continuing focus on AM for military and defense, and AUKUS, more specifically Australia. Please enjoy Episode 26, and check out our prior episodes. This episode was recorded February 18, 2025. Timestamps: 00:14 – Welcome Dayton Horvath (AMT) to Episode 26 00:33 – Additive Manufacturing Strategies 2025 review 01:22 – Specialization vs generalization for AM solutions 02:26 – AM fits in the manufacturing ecosystem, not on an island 02:56 – John Barnes: “Stop calling it ‘postprocessing’ --- it’s just ‘processing’ a04:30 – A continuing focus on defense for AM 05:20 – The focus on defense zoomed in even more the following week at MILAM 06:10 – 2024 3DP/AM investments, through the lens of AMT: A big drop! 08:32 – 2024 3DP/AM M&A, through the lens of AMT: A consistent number of deals, but how good were they? 10:33 – Notable M&A in 2024: ADDMAN and KAM 10:58 – Software buys simulation, Part 1: Synopsys (SNPS) and Ansys (ANSS) 11:25 – Status of the Nano Dimension (NNDM) acquisitions of Desktop Metal (DM) and Markforged (MKFG). Shareholder letter issued in January. 12:06 – Software buys simulation, Part 2: Siemens (SIEGY) to acquire Altair (ALTR) 14:30 – 3D Systems (DDD) sells Geomagics to Hexagon (HXGBY) 16:40 – Shapeways acquires Thangs 17:32 – BICO (CLLKF) continues to divest, sells Nanoscribe to LAB14 for EUR 26M 20:11 – KTI-G (KTG.ASX) set to acquire and rebrand to Metal Powder Works 25:25 – GoEngineer acquires CAD MicroSolutions 27:18 – American Axel Manufacturing (AXL) acquiring GKN Metallurgy and GKN Automotive 31:50 – Stratasys (SSYS) to receive $120M investment from Fortissimo Partners 34:58 – Backflip raises $30M for text to 3D print software 37:12 – Axial3D raises $18M for AI-driven medical 3DP software 41:00 – Amaero receives $23.5M loan from US Import-Export Bank, and AUD $22M Private Placement 44:22 – AML3D (AL3.ASX) receives AUD $30M financing 45:44 – Firehawk Aerospace raises $60M from Donald Trump, Jr. (sort of…) 49:10 – Aspect Biosystems raises $115B Series B for bioprinting 49:56 – Sintavia receives $10M debt financing from Stifel North America and ASTRO America 52:53 – Mighty Buildings seeks an exit 53:24 – Toyota invests $44M in Interstellar 53:35 – AscendArc raises $4M 53:47 – Eric Schmidt invests in Relativity Space 54:45 – Thanks again to Dayton Horvath 55:21 – Disclaimer Disclaimer: This content is for informational purposes only, you should not construe any such information or other material as legal, tax, investment, financial, or other advice. Nothing stated on this podcast constitutes a solicitation, recommendation, endorsement, or offer by the hosts, the organizer or any third-party service provider to buy or sell any...

    ٥٧ من الدقائق

  4. ١٣ يناير

    Printing Money Episode 25: Deals & Analysis with Arno Held (AM Ventures) and Tali Rosman

    Welcome to 2025, and welcome to Printing Money Episode 25!  For this episode Danny welcomes back a couple of previous guests: Arno Held (AM Ventures) and startup advisor Tali Rosman. It’s a new year so, naturally, this episode has its share of reflecting on the 2024 that was and the 2025 (and beyond) that will be. Danny, Arno, and Tali start off by harkening back one last time to Formnext – what is traditionally the end of the 3D printing year turned out only to be a prelude to a whole lot of industry-shifting news in December. So yes, Danny, Arno and Tali discuss Shapeways’ rebirth, Forward AM’s insolvency, Velo’s restructuring, voxeljet’s go-private. And this is all really interesting, but it’s only the appetizer. Next, Episode 25 wades into the deep end, analyzing and opining on the goings-on with Nano Dimension. Will the acquisitions of Desktop Metal and Markforged happen? Will the shareholder activists force the company to unwind? And what’s this about tin foil hats and Russian oligarchs? After the Nano Dimension discussion, Episode 25 moves on to review some of 2024’s venture capital raises, including a few recent ones.  Then, Danny, Arno and Tali consider the current artificial intelligence (AI) revolution and how it might dovetail with what’s to come for additive manufacturing (AM) this year and further into the future. Please enjoy Episode 25, and please join Danny, Arno, Tali, and your other favorite Printing Money personalities at AM Strategies next month, Feb 4-6 in New York City. This episode was recorded January 8, 2025. Timestamps: 00:14 – Welcome to Episode 25 00:31 – Welcome back to Arno Held (AM Ventures) and Tali Rosman 01:21 – Reflections on Formnext and summing up 2024 03:48 – BASF Forward AM insolvency filing 05:11 – So much happened after Formnext! 07:38 – Shapeways reborn 09:14 – Velo3D (VLDX) restructured 11:31 – Voxeljet acquired by its investor, Anzu Partners 12:10 – Whither Nano Dimension (NNDM), Desktop Metal (DM), and Markforged (MKFG)? 13:11 – A pile of cash, shareholder activism, lawsuits… 15:01 – russianoligarchs.com (That’s not a typo!) 17:32 – The Oerlikon (OERLY) connection 21:45 – What should/could Nano Dimension do? 26:35 – Siemens to acquire Altair, 3D Systems selling Geomagic to Hexagon 28:23 – Buyers’ market: VC into AM has dropped 80% in twenty-four months 30:33 – Broad themes for 2025: M&A is coming back, Reshoring is now, Materials in focus 35:10 – Fabri raises $5M for investment casting 36:33 – Industrializing AM technology: Conflux raises $11M Series B 38:23 – AM Ventures and HZG Group co-invest on Spectroplast 39:43 – HZG invests in Craftcloud/All3DP 40:31 – AI in the 3D printing industry 41:46 – 1000 Kelvin and Euler deploy AI to 3DP/AM 45:27 – The next wave for 3DP/AM has already gotten started 47:02 – Come meet us at AMS (Feb 4-6 in NYC)! 47:43 – Thanks to Arno and Tali! Disclaimer: This content is for informational purposes only, you should not construe any such information or other material as legal, tax, investment, financial, or other advice. Nothing stated on this podcast constitutes a solicitation, recommendation, endorsement, or offer by the hosts, the organizer or any third-party service provider to buy or sell any securities or other financial instruments in this or in any other jurisdiction in which such solicitation or offer would be unlawful under the securities laws of such jurisdiction.  The information on this podcast is of a general nature that does not address the circumstances and risk profile of any individual or entity and should not constitute professional and/or financial advice. Referenced transactions are sourced from publicly available information.

    ٤٩ من الدقائق

  5. ٠٥‏/١٢‏/٢٠٢٤

    Printing Money Episode 24: Q3 2024 Earnings Review with Troy Jensen, Cantor Fitzgerald

    Welcome to Printing Money Episode 24. Troy Jensen, Managing Director of Cantor Fitzgerald, joins Danny Piper, Managing Partner at NewCap Partners, once again as it is time to review the Q3 2024 earnings in the additive manufacturing (AM) industry. Give us 36 minutes and we’ll give you the 3D printing world! Danny and Troy discuss all of the public company earnings reports, of course. Thanks to some data from AM Research, Danny and Troy also provide commentary on sales and traction from some of the more difficult companies (privately owned, or non-reporting parts of larger public companies) to track. First Danny and Troy layout the macro picture through which to view the Q3 numbers.  Next, they discuss takeaways from Formnext 2024.  Then they jump in and run through the financial performance of all the significant 3D printing manufacturers.  Along the way they sprinkle in relevant discussion of components and peripherals such as lasers and powder companies. You can be sure that Printing Money Episode 24 also includes the latest analysis on the consolidating landscape (ie; NNDM buying DM and MKFG) and the biggest hot button issues (ie; Chinese 3D printing vs the West). Please enjoy Episode 24. This episode was recorded December 2, 2024. Timestamps: 00:24 – Welcome to Episode 24, and welcome to Troy Jensen (Cantor Fitzgerald) 01:14 – Bigger picture: Q3 was full of geopolitics, let alone a US presidential election 02:05 – The tenor at Formnext 2024 03:32 – Evidence of a bottom; the Q3 2024 numbers for the 3DP/AM industry 04:38 – Rotation time?  Large cap tech has outperformed for a couple years 06:03 – Nikon SLM Solutions Q3 2024, in light of AM Research data 07:19 – BLT and Farsoon take flight with Airbus 10:43 – EOS Q3 2024, considering AM Research data 11:41 – nLIGHT (LASR) beaming into the laser metal AM markets 13:17 – Velo3D (VLDX) to the pink sheets, and the SpaceX deal 15:54 – Stratasys (SSYS) Q3 2024 20:05 – 3D Systems (DDD) Q3 2024 21:00 – Relationship status for 3D Systems and Align (ALGN) 23:41 – Nano Dimension (NNDM) Q3 2024 24:17 – Shareholder activism at NNDM 24:45 – Desktop Metal (DM) Q3 2024 25:37 – Markforged (MKFG) Q3 2024 26:25 – Financials and outlook for NNDM, DM and MKFG combined 30:10 – Materialise (MTLS) Q3 2024 34:06 – Voxeldance booth shut-down by German authorities at Formnext 2024 35:22 – IperionX (IPX) and Carpenter (CRS): Metal powder companies doing well in the stock market 36:36 – Thanks again to Troy, and thanks everybody for listening! Disclaimer: This content is for informational purposes only, you should not construe any such information or other material as legal, tax, investment, financial, or other advice. Nothing stated on this podcast constitutes a solicitation, recommendation, endorsement, or offer by the hosts, the organizer or any third-party service provider to buy or sell any securities or other financial instruments in this or in any other jurisdiction in which such solicitation or offer would be unlawful under the securities laws of such jurisdiction.  The information on this podcast is of a general nature that does not address the circumstances and risk profile of any individual or entity and should not constitute professional and/or financial advice. Referenced transactions are sourced from publicly available information.

    ٣٧ من الدقائق

  6. ٠٥‏/١١‏/٢٠٢٤

    Printing Money Episode 23: Additive Manufacturing Deal Analysis with Alex Kingsbury

    Episode 23 is here, and it’s chock-full. Alex Kingsbury, nLIGHT Market Development Manager and, not to mention, co-creator of the Printing Money podcast, re-joins Danny and the result is 60 minutes of additive manufacturing (AM) deals and analysis. First, we jump right in to cover Nano Dimension’s in-progress deals with Desktop Metal and Markforged. Then, we cover services bureaus, major public-private funding news, and a lot of venture capital (VC) raises and financings. Last, we touch on the recent news of the postponement of Formnext Chicago. Here are just a few companies that get mentioned in this episode: Incodema, I3D, KAM, ADDMAN, Sintavia, Stifel North Atlantic, ASTRO America, Summers Value Partners, Stellantis, In-Q-Tel, Embedded Ventures, SpaceX, nTop, Seurat, NVIDIA, AE Ventures, HorizonX, Nimble Partners, AM Ventures, Breakthrough Victoria, Finindus, Sumitomo, and more. Please enjoy Episode 23, and see you later this month at Formnext in Frankfurt, or, as Danny so well puts it, “The Super Bowl of 3D printing." This episode was recorded October 29, 2024. Timestamps: 00:14 – Welcome to Episode 23, and welcome to Alex Kingsbury 01:37 – We have a lot to cover! 02:03 –AMS was a telling preview of 2024 02:53 – Nano Dimension (NNDM) acquiring Desktop Metal (DM) 05:21 – NNDM-DM last steps before closing in Q4 2024 08:04 – Nano Dimension (NNDM) acquiring Markforged (MKFG) 10:25 – An enormous amount of efficiencies 12:09 – How will NNDM, DM, and MKFG integrate? 14:19 – Markforged settles litigation from Continuous Composites 15:41 – ADDMAN acquires KAM 19:18 – AM service bureau markets: All boats are floating in the US, and all boats are sinking in Europe (Or, “Europe makes the printers, The USA prints the parts”) 20:02 – Sandvik divesting investment in BEAMIT 20:26 – Proto Labs closing metal LPBF facility in Germany 23:36 – AM Forward fund is approved by SBIC 26:26 – Restor3d closes $70m financing ($55M equity, $15M debt) 27:56 – 6K $82M Series E round 31:17 – Chromatic3D closes $6M round 32:55 – Freeform raises $14M 35:15 – NVIDIA backs 3D printing! 38:11 – nTop receives investment from NVIDIA 40:34 – AM Ventures’ portfolio companies get a boost 40:53 – Conflux raises $11M Series B for heat exchangers 43:58 – Fortius Metals raises $2M from Finindus 45:15 – Sun Metalon raises $21M Series A led by Sumitomo 47:49 – UpNano raises EUR 7M 48:33 – NematX raises EUR 1.5M 50:33 – Mosaic Manufacturing raises CAD 28M 52:01 – Formnext Chicago is postponed 56:55 – See you at Formnext Frankfurt in a few weeks! Disclaimer: This content is for informational purposes only, you should not construe any such information or other material as legal, tax, investment, financial, or other advice. Nothing stated on this podcast constitutes a solicitation, recommendation, endorsement, or offer by the hosts, the organizer or any third-party service provider to buy or sell any securities or other financial instruments in this or in any other jurisdiction in which such solicitation or offer would be unlawful under the securities laws of such jurisdiction.  The information on this podcast is of a general nature that does not address the circumstances and risk profile of any individual or entity and should not constitute professional and/or financial advice. Referenced transactions are sourced from publicly available information.

    ٥٩ من الدقائق

  7. ٢٥‏/٠٩‏/٢٠٢٤

    Printing Money Episode 22: Dave Burns, AMT Senior Advisor, “Live” from IMTS

    Episode 22 of Printing Money comes with a twist: this episode is from a live recording on the Formnext stage at IMTS on September 9, 2024.  We were lucky enough to have Danny joined by Dave Burns (Senior Advisor, AMT) for an executive perspective on the additive manufacturing (AM) markets, replete with decades of first-hand experience, first as CEO of Gleason Corporation and then as a co-founder and President of ExOne (now part of Desktop Metal). First we talk through Dave’s career, with a focus on the founding of ExOne in 2005 through its IPO in 2013. Then we view the current state of the 3D printing industry, discussing market capitalizations, transaction values, and investing for the long game. This is followed by a look ahead at the drivers to propel the AM industry into maturity, with a focus on applications. Last, we have the heretofore unique chance to field questions from our live audience. Please forgive us any audio imperfections. Considering this was recorded live using an iPhone and amid a crowd of 100,000+ IMTS attendees, we are proud of it, and thankful to have such a great podcast producer (thank you, Jake!). So, please enjoy Episode 22, stay tuned for coming episodes, and browse our recent discussions while you wait for the next ones. Timestamps: 00:15 – Welcome to Printing Money Live at IMTS! 00:37 – Introducing Dave Burns (AMT) 01:26 – Dave Burns’ career in manufacturing technology 03:32 – AM and traditional manufacturing are co-dependent 04:14 – From 3D printing start-up to IPO: Dave’s experience at ExOne 08:00 – Market Caps in the context of historical 3DP/AM deals 08:56 – Patient Money: 3DEO receives $3.5M investment from Mizuho 12:09 – Existential De-risking: Key drivers for a long-term AM strategy 16:20 – What does the maturity of the 3D printing industry look like? 18:33 – A different mindset: Application specific printers to compete with larger all-purpose machines? 22:21 – Audience Q&A: More on the value of application specific 3D printing 24:58 – Audience Q&A: Are we solving the same problem? 27:17 – Audience Q&A: Reshoring via government funding as a path to 3DP/AM industry maturity? 29:51 – Wrap-up and thank you Disclaimer: This content is for informational purposes only, you should not construe any such information or other material as legal, tax, investment, financial, or other advice. Nothing stated on this podcast constitutes a solicitation, recommendation, endorsement, or offer by the hosts, the organizer or any third-party service provider to buy or sell any securities or other financial instruments in this or in any other jurisdiction in which such solicitation or offer would be unlawful under the securities laws of such jurisdiction.  The information on this podcast is of a general nature that does not address the circumstances and risk profile of any individual or entity and should not constitute professional and/or financial advice. Referenced transactions are sourced from publicly available information.

    ٣٠ من الدقائق

  8. ٠٩‏/٠٩‏/٢٠٢٤

    Printing Money Episode 21: Q2 2024 Earnings Analysis with Troy Jensen, Cantor Fitzgerald

    Like sands through the hourglass, so is the Q2 2024 earnings season.  All of the publicly traded 3D printing companies have reported their financials, so it is time to welcome back Cantor Fitzgerald Managing Director Troy Jensen to discuss and analyze the numbers. Problematic balance sheets and challenging operating environments serve as a backdrop for some negative themes including strategic reviews, slashed operating expenses, and dwindling market capitalizations. But it’s not all gloom and doom. Nikon SLM Solutions continues to experience growth, and some services and software providers performed well enough too.  And through it all, the additive manufacturing (AM) industry is still growing, so Danny and Troy point to some of the private companies where growth seems apparent. AM Research has more than a decade of historical data on private and public 3D printing companies alike and can certainly back up Danny and Troy’s thoughts on the privates. Please enjoy Episode 21, and, if you are at IMTS this week, come find Danny, and Troy, and the 3DPrint.com and AM Research teams, all of which will be presenting on either the Formnext Stage or at the Investor Forum. Timestamps: 00:21 – Welcome back, Troy Jensen (Cantor Fitzgerald) 00:50 – See us live at IMTS! 01:32 – Q2 2024 earnings themes 02:20 – 3D Systems (DDD) Q2 2024 (and Q1 2024) earnings 04:55 – Cost cutting at 3D Systems, and some nice new industrial sales, but a dwindling valuation 08:06 – Stratasys (SSYS) Q2 2024 earnings 09:43 – Stratasys sues Bambu Labs 12:01 – Stratasys’ strategic review 14:28 – Inkbit, AM Craft, and Stratasys’ strategy 15:57 – Speculation: Let Nano Dimension (NNDM) acquire Desktop Metal (DM), and then merge with Nano Dimension? 17:16 – Desktop Metal (DM) Q2 2024 earnings 21:32 – Markforged (MKFG) Q2 2024 earnings 23:00 – Speculation: Should Markforged tie-up with Continuous Composites? 25:25 – Impossible Objects impresses at RAPID 26:15 – Velo3D (VLD) Q2 2024 earnings 26:42 – Nikon SLM Solutions Q2 growth 27:33 – ADDMAN to acquire KAM 28:27 – Speculation: This is the quarter that we find out what happens to Velo3D 30:24 – Reshoring: Nikon SLM rebrands Morf3D into Nikon AM Synergy 31:36 – Formlabs launches Form 4 32:42 – Materialise (MTLS) Q2 2024 earnings 33:58 – Materialise acquires FEops 36:21 – Proto Labs (PRLB) Q2 2024 earnings 36:58 – Xometry (XMTR) Q2 2024 earnings 37:43 – IMTS Investor Forum 38:28 – Shapeways’ Netherlands unit gets a bid 39:00 – Q3 2024 earnings preview and episode wrap-up Disclaimer: This content is for informational purposes only, you should not construe any such information or other material as legal, tax, investment, financial, or other advice. Nothing stated on this podcast constitutes a solicitation, recommendation, endorsement, or offer by the hosts, the organizer or any third-party service provider to buy or sell any securities or other financial instruments in this or in any other jurisdiction in which such solicitation or offer would be unlawful under the securities laws of such jurisdiction.  The information on this podcast is of a general nature that does not address the circumstances and risk profile of any individual or entity and should not constitute professional and/or financial advice. Referenced transactions are sourced from publicly available information.

    ٤٠ من الدقائق
مشاهدة الكل (٢٨)

حول

As the additive manufacturing industry continues to rapidly grow and evolve, so too does the financing that enables the technology innovation. ‘Printing Money’ takes a deeper look at the transactions behind some of the most innovative 3D printing businesses. We explore everything from mergers, acquisitions, fundraising, and the public markets, while considering broader technology trends and market movements in the AM industry. Each episode, we’ll dive into the latest investments in the 3D printing industry and understand how they’ll shape the future of the industry. With our combined expertise in finance and additive manufacturing, we’ll give you the context you need to better understand the deals done in our industry.

المعلومات

  • صناع العمل
    Printing Money
  • سنوات النشاط
    ٢٠٢٣ - ٢٠٢٥
  • الحلقات
    ٢٨
  • التقييم
    ملائم

قد يعجبك أيضًا

للاستماع إلى حلقات ذات محتوى فاضح، قم بتسجيل الدخول.

اطلع على آخر مستجدات هذا البرنامج

قم بتسجيل الدخول أو التسجيل لمتابعة البرامج وحفظ الحلقات والحصول على آخر التحديثات.
تحديد بلد أو منطقة

أفريقيا والشرق الأوسط، والهند

آسيا والمحيط الهادئ

أوروبا

أمريكا اللاتينية والكاريبي

الولايات المتحدة وكندا
OSZAR »